BGR-2002-Baytex-DSC07329.jpg

Rush Industries is an environmentally conscious company that builds high efficiency enclosed vapor combustors and flare stacks for the energy sector. Enclosed vapor combustors may also be referred to as "enclosed flares" and/or "hybrid incinerators".

 

Our complete line of 18”, 24”, 36”, and Eco Combustors are fully manufacturer tested so we can ensure your company is compliant with U.S. EPA guidelines, AER D 60 regulations, and Saskatchewan S-10 / S-20 regulations. Further, Rush Industries operates under the ISO 9001-2008 quality control system.

Each product meets and exceeds the United States Environmental Protection Agency (EPA) NSPS Subpart 0000 (“Quad 0”) regulations in addition to the Alberta Energy Regulator (AER) standards and Saskatchewan MOE regulations.

We combine ACL Manufacturing’s reliable, easy to use, CSA approved ignition control systems with patented designs to provide a completely safe and environmentally sound product.


All Rush Industries enclosed vapor combustors and flare stacks are built to provide the quality assurance and reliability to meet today’s rigorous standards.

BGR Low Pressure

Eco Combustor

Model: BGR-18LP Eco

The BGR-18LP Eco Combustor is a highly versatile, low cost vapour combustor designed to destruct volatile organic compounds (VOCs) and BTEXs produced from casing gas, oil storage tanks, or de-hys. The combustor eliminates the need to install expensive vapour recovery units (VRU) or large incinerators.

The high efficiency burner inside the combustor chamber provides low pressure continuous burning capabilities, high combustion efficiency, low emissions, reduced odours, no visible flame, and increased flame stability with excellent turndown ratios for low pressure applications.

Approvals: 

  • AER Directive 60 & Saskatchewan S 20

  • Meets or exceeds the US EPA NSPS 40 Subpart 0000 (Quad “O”)

  • BMS Controller CSA approved for Class I Div 2 location

  • CSA B149.3-20, C22.2 No 199-M89 E60730-1-2013, ANSI Z21.20-2014

  • CAN/CSA C22.2 No. 60730-2-5-2014 Compliant, meets NFPA standards

Controller

Specification

  • CSA approved ACL3200 or CSC400 Ignition Control System (meets CSA B149.3-20)

  • Monitors and controls combustion

  • Remote Stop and Start

  • Auto re-light, continuous trial for ignition

  • Solar operated 12/24VDC (optional Rush Power available)

  • Thermocouple and thermowell for temperature sensing and monitoring (optional)

  • Data logging & acquisition capabilities

  • Modbus communication capabilities built in

Combustor

Features

  • Patented high volume combustion device

  • 1,700,000 scf/d HP flow rate capacity

  • 20,000 scf/d LP flow rate capacity

  • Meets or exceeds the requirements of AER Directive 60 & Saskatchewan S 20 and US EPA NSPS 40 Subpart 0000 (Quad “O”)

  • High pressure destruction efficiency greater than 98%

  • Low pressure destruction efficiency greater than 99.9%

  • LP operating pressures from 0.09 psi (1.5 oz/in2) to 1.5 psi

  • HP operating pressures from 0 psi to 120 psi

  • 18" x 20' high stainless steel fire tube

  • Excellent turndown ratio

  • Heat shield for operator`s safety

Burner

Specification

  • Full stainless steel burner

  • Air and fuel assist capabilities

  • Extremely stable at wide range of flow rates, down to 1.5oz/in2

  • No flame lift-off or impingement

BGR Low Pressure

Eco Combustor

Model: BGR-24LP Eco

The BGR-24LP Eco combustor is a highly versatile, low cost vapour combustor designed to destruct volatile organic compounds (VOCs) and BTEXs produced from casing gas, oil storage tanks, or de-hys. The combustor eliminates the need to install expensive vapour recovery units (VRU) or large incinerators.

 

The high efficiency burner inside the combustor chamber provides low pressure continuous burning capabilities, high combustion efficiency, low emissions, reduced odours, no visible flame, and increased flame stability with excellent turndown ratios for low pressure

applications.

Approvals:

  • AER Directive 60 & Saskatchewan S 20

  • BMS Controller CSA approved for Class I Div 2 location

  • CSA B149.3-20

  • C22.2 No 199-M89

  • E60730-1-2013, ANSI Z21.20-2014

  • CAN/CSA C22.2 No. 60730-2-5-2014 Compliant, meets NFPA standards

Controller

Specification

  • CSA approved ACL3200 or CSC400 Ignition Control System (meets CSA B149.3-20)

  • Monitors and controls combustion

  • Remote Stop and Start

  • Auto re-light, continuous trial for ignition

  • Solar operated 12/24VDC (optional Rush Power available)

  • Thermocouple and thermowell for temperature sensing and monitoring (optional)

  • Data logging & acquisition capabilities

  • Modbus communication capabilities built in

Combustor

Features

  • Patented high volume combustion device

  • 1,700,000 scf/d HP flow rate capacity

  • 20,000 scf/d LP flow rate capacity

  • Meets or exceeds the requirements of AER Directive 60 & Saskatchewan S 20 and US EPA NSPS 40 Subpart 0000 (Quad “O”)

  • High pressure destruction efficiency greater than 98%

  • Low pressure destruction efficiency greater than 99.9%

  • LP operating pressures from 0.09 psi (1.5 oz/in2) to 1.5 psi

  • HP operating pressures from 0 psi to 120 psi

  • 18" x 20' high stainless steel fire tube

  • Excellent turndown ratio

  • Heat shield for operator`s safety

Burner

Specification

  • Full stainless steel burner

  • Air and fuel assist capabilities

  • Extremely stable at wide range of flow rates, down to 1.5oz/in2

  • No flame lift-off or impingement

BGR Low Pressure Eco Combustor

Model: BGR-36LP Eco

The BGR-36LP Eco Combustor is a highly versatile, low cost vapour combustor designed to destruct volatile organic compounds (VOCs) and BTEXs produced from casing gas, oil storage tanks, or de-hys. The combustor eliminates the need to install expensive vapour recovery units (VRU) or large incinerators.

The high efficiency burner inside the combustor chamber provides low pressure continuous burning capabilities, high combustion efficiency, low emissions, reduced odours, no visible flame, and increased flame stability with excellent turndown ratios for low pressure applications.

Approvals:

  • AER Directive 60 & Saskatchewan S 20

  • BMS Controller CSA approved for Class I Div 2 location

  • CSA B149.3-20

  • C22.2 No 199-M89

  • E60730-1-2013, ANSI Z21.20-2014

  • CAN/CSA C22.2 No. 60730-2-5-2014 Compliant, meets NFPA standards

Controller

Specification

  • CSA approved ACL3200 or CSC400 Ignition Control System (meets CSA B149.3-20)

  • Monitors and controls combustion

  • Remote Stop and Start

  • Auto re-light, continuous trial for ignition

  • Solar operated 12/24VDC (optional Rush Power available)

  • Thermocouple and thermowell for temperature sensing and monitoring (optional)

  • Data logging & acquisition capabilities

  • Modbus communication capabilities built in

Combustor

Features

  • Patented high volume combustion device

  • 1,700,000 scf/d HP flow rate capacity

  • 20,000 scf/d LP flow rate capacity

  • Meets or exceeds the requirements of AER Directive 60 & Saskatchewan S 20 and US EPA NSPS 40 Subpart 0000 (Quad “O”)

  • High pressure destruction efficiency greater than 98%

  • Low pressure destruction efficiency greater than 99.9%

  • LP operating pressures from 0.09 psi (1.5 oz/in2) to 1.5 psi

  • HP operating pressures from 0 psi to 120 psi

  • 18" x 20' high stainless steel fire tube

  • Excellent turndown ratio

  • Heat shield for operator`s safety

Burner

Specification

  • Full stainless steel burner

  • Air and fuel assist capabilities

  • Extremely stable at wide range of flow rates, down to 1.5oz/in2

  • No flame lift-off or impingement

BGR Low Pressure

Eco Combustor

Model: BGR-18LP/LP Eco

The Patented BGR-18LP/LP Eco Combustor is a highly versatile, low cost vapour combustor designed to destruct volatile organic compounds (VOCs) and BTEXs produced from casing gas, oil storage tanks, de-hys, produced condensate, and water storage tanks, or depressuring vessels and pipelines.

The high pressure line on the outside of the combustor chamber provides high pressure blow down capabilities or additional low pressure flaring capabilities. Interchangeable flare tips allow for a wide range of flow rates in compliance with NSPS Subpart A flare velocity requirements.

The high efficiency burner inside the combustor chamber provides low pressure continuous burning capabilities, high combustion efficiency, low emissions, reduced odours, no visible flame, and increased flame stability with excellent turndown ratios for low pressure applications.

Approvals:

  • AER Directive 60 & Saskatchewan S 20

  • Meets or exceeds the US EPA NSPS 40 Subpart 0000 (Quad “O”)

  • BMS Controller CSA approved for Class I Div 2 location

  • CSA B149.3-20, C22.2 No 199-M89 E60730-1-2013, ANSI Z21.20-2014

  • CAN/CSA C22.2 No. 60730-2-5-2014 Compliant, meets NFPA standards

Controller

Specification

  • CSA approved ACL3200 or CSC400 Ignition Control System (meets CSA B149.3-20)

  • Monitors and controls ignition for LP combustor and HP flare

  • Remote Stop and Start

  • Auto re-light, continuous trial for ignition

  • Solar operated 12/24VDC (optional Rush Power available)

  • Thermocouple and thermowell for temperature sensing and monitoring (optional)

  • Data logging & acquisition capabilities

  • Modbus communication capabilities built in

Combustor

Features

  • Patented high volume combustion device

  • 1,700,000 scf/d HP flow rate capacity

  • 20,000 scf/d LP flow rate capacity

  • Meets or exceeds the requirements of AER Directive 60 & Saskatchewan S 20 and US EPA NSPS 40 Subpart 0000 (Quad “O”)

  • High pressure destruction efficiency greater than 98%

  • Low pressure destruction efficiency greater than 99.9%

  • LP operating pressures from 0.09 psi (1.5 oz/in2) to 1.5 psi

  • HP operating pressures from 0 psi to 120 psi

  • 18" x 20' high stainless steel fire tube

  • Excellent turndown ratio

  • Heat shield for operator`s safety

Burner

Specification

  • Full stainless steel burner

  • Air and fuel assist capabilities

  • Extremely stable at wide range of flow rates, down to 1.5oz/in2

  • No flame lift-off or impingement

BGR Low Pressure

Eco Combustor

Model: BGR-24LP/LP Eco

The BGR-24LP/LP Eco combustor is a highly versatile, low cost vapour combustor designed to destruct volatile organic compounds (VOCs) and BTEXs produced from casing gas, oil storage tanks, or de-hys. The combustor eliminates the need to install expensive vapour recovery units (VRU) or large incinerators.

The high efficiency burner inside the combustor chamber provides low pressure continuous burning capabilities, high combustion efficiency, low emissions, reduced odours, no visible flame, and increased flame stability with excellent turndown ratios for low pressure applications.

Approvals:

  • AER Directive 60 & Saskatchewan S 20

  • BMS Controller CSA approved for Class I Div 2 location

  • CSA B149.3-20

  • C22.2 No 199-M89

  • E60730-1-2013, ANSI Z21.20-2014

  • CAN/CSA C22.2 No. 60730-2-5-2014 Compliant, meets NFPA standards

Controller

Specification

  • CSA approved ACL3200 or CSC400 Ignition Control System (meets CSA B149.3-20)

  • Monitors and controls combustion

  • Remote Stop and Start

  • Auto re-light, continuous trial for ignition

  • Solar operated 12/24VDC (optional Rush Power available)

  • Thermocouple and thermowell for temperature sensing and monitoring (optional)

  • Data logging & acquisition capabilities

  • Modbus communication capabilities built in

Combustor

Features

  • Patented high volume combustion device

  • 1,700,000 scf/d HP flow rate capacity

  • 20,000 scf/d LP flow rate capacity

  • Meets or exceeds the requirements of AER Directive 60 & Saskatchewan S 20 and US EPA NSPS 40 Subpart 0000 (Quad “O”)

  • High pressure destruction efficiency greater than 98%

  • Low pressure destruction efficiency greater than 99.9%

  • LP operating pressures from 0.09 psi (1.5 oz/in2) to 1.5 psi

  • HP operating pressures from 0 psi to 120 psi

  • 18" x 20' high stainless steel fire tube

  • Excellent turndown ratio

  • Heat shield for operator`s safety

Burner

Specification

  • Full stainless steel burner

  • Air and fuel assist capabilities

  • Extremely stable at wide range of flow rates, down to 1.5oz/in2

  • No flame lift-off or impingement

BGR Low Pressure Eco Combustor

Model: BGR-36LP/LP Eco

The BGR-36LP/LP Eco combustor is a highly versatile, low cost vapour combustor designed to destruct volatile organic compounds (VOCs) and BTEXs produced from casing gas, oil storage tanks, or de-hys. The combustor eliminates the need to install expensive vapour recovery units (VRU) or large incinerators.

The high efficiency burner inside the combustor chamber provides low pressure continuous burning capabilities, high combustion efficiency, low emissions, reduced odours, no visible flame, and increased flame stability with excellent turndown ratios for low pressure applications.

Approvals:

  • AER Directive 60 & Saskatchewan S 20

  • BMS Controller CSA approved for Class I Div 2 location

  • CSA B149.3-20

  • C22.2 No 199-M89

  • E60730-1-2013, ANSI Z21.20-2014

  • CAN/CSA C22.2 No. 60730-2-5-2014 Compliant, meets NFPA standards

Controller

Specification

  • CSA approved ACL3200 or CSC400 Ignition Control System (meets CSA B149.3-20)

  • Monitors and controls combustion

  • Remote Stop and Start

  • Auto re-light, continuous trial for ignition

  • Solar operated 12/24VDC (optional Rush Power available)

  • Thermocouple and thermowell for temperature sensing and monitoring (optional)

  • Data logging & acquisition capabilities

  • Modbus communication capabilities built in

Combustor

Features

  • Patented high volume combustion device

  • 1,700,000 scf/d HP flow rate capacity

  • 20,000 scf/d LP flow rate capacity

  • Meets or exceeds the requirements of AER Directive 60 & Saskatchewan S 20 and US EPA NSPS 40 Subpart 0000 (Quad “O”)

  • High pressure destruction efficiency greater than 98%

  • Low pressure destruction efficiency greater than 99.9%

  • LP operating pressures from 0.09 psi (1.5 oz/in2) to 1.5 psi

  • HP operating pressures from 0 psi to 120 psi

  • 18" x 20' high stainless steel fire tube

  • Excellent turndown ratio

  • Heat shield for operator`s safety

Burner

Specification

  • Full stainless steel burner

  • Air and fuel assist capabilities

  • Extremely stable at wide range of flow rates, down to 1.5oz/in2

  • No flame lift-off or impingement

BGR High Pressure/Low Pressure

Eco Combustor

Model: BGR-24HP/LP/LP Eco

The Patented BGR-24HP/LP Eco Combustor is a highly versatile, low cost vapour combustor designed to destruct volatile organic compounds (VOCs) and BTEXs produced from casing gas, oil storage tanks, de-hys, produced condensate, and water storage tanks, or depressuring vessels and pipelines.

The optional high pressure line on the outside of the combustor chamber provides high pressure blow down capabilities or additional low pressure flaring capabilities. Interchangeable flare tips allow for a wide range of flow rates in compliance with NSPS Subpart A flare velocity requirements.

The high efficiency burner inside the combustor chamber provides low pressure continuous burning capabilities, high combustion efficiency, low emissions, reduced odours, no visible flame, and increased flame stability with excellent turndown ratios for low pressure applications.

Approvals:

  • AER Directive 60 & Saskatchewan S 20

  • BMS Controller CSA approved for Class I Div 2 location

  • CSA B149.3-20

  • C22.2 No 199-M89

  • E60730-1-2013, ANSI Z21.20-2014

  • CAN/CSA C22.2 No. 60730-2-5-2014 Compliant, meets NFPA standards

Controller

Specification

  • CSA approved ACL3200 or CSC400 Ignition Control System (meets CSA B149.3-20)

  • Monitors and controls combustion

  • Remote Stop and Start

  • Auto re-light, continuous trial for ignition

  • Solar operated 12/24VDC (optional Rush Power available)

  • Thermocouple and thermowell for temperature sensing and monitoring (optional)

  • Data logging & acquisition capabilities

  • Modbus communication capabilities built in

Combustor

Features

  • Patented high volume combustion device

  • 1,700,000 scf/d HP flow rate capacity

  • 20,000 scf/d LP flow rate capacity

  • Meets or exceeds the requirements of AER Directive 60 & Saskatchewan S 20 and US EPA NSPS 40 Subpart 0000 (Quad “O”)

  • High pressure destruction efficiency greater than 98%

  • Low pressure destruction efficiency greater than 99.9%

  • LP operating pressures from 0.09 psi (1.5 oz/in2) to 1.5 psi

  • HP operating pressures from 0 psi to 120 psi

  • 18" x 20' high stainless steel fire tube

  • Excellent turndown ratio

  • Heat shield for operator`s safety

Burner

Specification

  • Full stainless steel burner

  • Air and fuel assist capabilities

  • Extremely stable at wide range of flow rates, down to 1.5oz/in2

  • No flame lift-off or impingement

BGR High Pressure/Low Pressure Eco Combustor

Model: BGR-36HP/LP/LP Eco

The Patented BGR-36HP/LP Eco combustor is a highly versatile, low cost vapour combustor designed to destruct volatile organic compounds (VOCs) and BTEXs produced from casing gas, oil storage tanks, de-hys, produced condensate, and water storage tanks, or depressuring vessels and pipelines.

The optional high pressure line on the outside of the combustor chamber provides high pressure blow down capabilities or additional low pressure flaring capabilities. Interchangeable flare tips allow for a wide range of flow rates in compliance with NSPS Subpart A flare velocity requirements.

The high efficiency burner inside the combustor chamber provides low pressure continuous burning capabilities, high combustion efficiency, low emissions, reduced odours, no visible flame, and increased flame stability with excellent turndown ratios for low pressure applications.

Approvals:

  • AER Directive 60 & Saskatchewan S 20

  • BMS Controller CSA approved for Class I Div 2 location

  • CSA B149.3-20

  • C22.2 No 199-M89

  • E60730-1-2013, ANSI Z21.20-2014

  • CAN/CSA C22.2 No. 60730-2-5-2014 Compliant, meets NFPA standards

Controller

Specification

  • CSA approved ACL3200 or CSC400 Ignition Control System (meets CSA B149.3-20)

  • Monitors and controls ignition for LP combustor and HP flare

  • Remote Stop and Start

  • Auto re-light, continuous trial for ignition

  • Solar operated 12/24VDC (optional Rush Power available)

  • Thermocouple and thermowell for temperature sensing and monitoring (optional)

  • Data logging & acquisition capabilities

  • Modbus communication capabilities built in

Combustor

Features

  • Patented high volume combustion device

  • 1,700,000 scf/d HP flow rate capacity

  • 20,000 scf/d LP flow rate capacity

  • Meets or exceeds the requirements of AER Directive 60 & Saskatchewan S 20 and US EPA NSPS 40 Subpart 0000 (Quad “O”)

  • High pressure destruction efficiency greater than 98%

  • Low pressure destruction efficiency greater than 99.9%

  • LP operating pressures from 0.09 psi (1.5 oz/in2) to 1.5 psi

  • HP operating pressures from 0 psi to 120 psi

  • 18" x 20' high stainless steel fire tube

  • Excellent turndown ratio

  • Heat shield for operator`s safety

Burner

Specification

  • Full stainless steel burner

  • Air and fuel assist capabilities

  • Extremely stable at wide range of flow rates, down to 1.5oz/in2

  • No flame lift-off or impingement

Eco Combustors

U.S. Distribution

Tel:  +1-405-703-2745

Email: info@acl-combustion.com

Mailing Address: 

Box 7528

Oklahoma City, OK 73153

Physical Address: 

228 S.E. 8th St

Moore, OK 73160

Head Office

Toll-Free: 1-877-638-5234

Tel:  +1-403-638-2287

Email: info@clearrushco.com

5406 Township Rd 325b, 

Sundre, Alberta, Canada

T0M 1X0

Divisions

  • LinkedIn
  • bit.ly/ClearRushCoInstagram
  • Facebook

General Inquiries

Back to Top

BACK TO TOP

© 2020 Clear Rush Co.