BGR-2002-Baytex-DSC07329.jpg

Discover our innovative solutions for emission reduction technologies in the energy sector

BGR LP Cube Combustor

Approvals

  • AER Directive 60 & Saskatchewan S 20

  • BMS Controller CSA approved for Class I Div 2 location

  • CSA B149.3-20, C22.2 No 199-M89

  • E60730-1-2013, ANSI Z21.20-2014

  • CAN/CSA C22.2 No. 60730-2-5-2014 Compliant, meets NFPA standards

BGR LP Cube Combustor

Models: 500, 1000, 1500

CRC-Patent Pending.png

The BGR Cube is a highly versatile, low cost vapour combustor designed to destruct volatile organic compounds (VOCs) and BTEXs produced from casing gas, pneumatic devices, or storage tanks. The BGR Cube eliminates the need to install expensive vapour recovery units (VRU) or uneconomical incinerators that provides an economical alternative to venting or flaring.

 

The high efficiency burner provides low pressure continuous burning capabilities, high combustion efficiency, low emissions, zero odours, no visible flame, and increased flame stability with excellent turndown ratios for low pressure applications.

 

The BGR Cube comes complete with pre-built and pre-mounted B149.3 compliant valve train, CSA approved Class I, Div II ACL CSC400 controller, air intake flame arrestors, and temperature monitoring thermocouples for a complete plug-and-play system.

Combustor

Specification

  • Destruction removal efficiency greater than 99.9% and meets the requirements of EPA NSPS 40 CFR 60 Subpart 0000 and AER Directive 60 & Saskatchewan S 20

  • Reduced spacing 10m from storage tanks or wellheads

  • Air intake flame arrestors

  • Low skin temperature

  • Low exhaust temperature

  • No visible flame

  • Direct spark ignition or continuous pilot

  • 5′ x 5′ x 10′  high free standing

  • Low pressure burner volume up to 52,500 scf/d or 1500 m3/d

  • Excellent turndown ratio 5:1

Controller

Specification

  • CSA approved CSC400 Ignition Control System (meets CSA B149.3-15 and ANSI Z21.20-2014/CSA C22.2 No. 60730-2-5-2014 with new ACL IGN400-PM ignition module)

  • Monitors and controls combustion

  • Remote Stop and Start

  • Auto re-light, continuous trial for ignition

  • Solar operated 12/24VDC

  • Modbus built-in for remote communication

  • Data logging & acquisition to meet EPA requirements

Burner

Specification

  • Full stainless steel burner

  • Extremely stable at wide range of flow rates

  • No flame lift-off or impingement

  • Reduced emissions (low NoX, and low CO)

Rush_Industries_1f_w_Div.png

Rush Industries is an environmentally conscious company that builds high efficiency enclosed vapor combustors and flare stacks for the energy sector. 

 

Our complete line of 18”, 24”, 36”, and Cube enclosed vapor combustors are fully manufacturer tested so we can ensure your company is compliant with U.S. EPA guidelines, AER D 60 regulations, and Saskatchewan S-10 / S-20 regulations. Further, Rush Industries operates under the ISO 9001-2015 quality control system.

We combine ACL Manufacturing’s reliable, easy to use, CSA approved ignition control systems with patented designs to provide a completely safe and environmentally sound product.


All Rush Industries enclosed vapor combustors and flare stacks are built to provide the quality assurance and reliability to meet today’s rigorous standards.

Rush Industries BGR LP Cube Combustor