ACL Logo 2.png
ACL 400.jpg

ACL manufactures a complete line of CSA approved flare stack ignition systems from a self-powered shot tube ignitor to a fully retractable automatic continuous pilot.

ACL 3200-1.JPG.jpg
CRC_3200_Spec_Sheet_2020_1.png

ACL 3200 Flare Stack / Incinerator

Ignition Systems

The ACL 3200 Ignition Systems can be used on any flare stack system.

 

The ignitor can be mounted directly onto a trolley system providing a fully retractable continuous pilot or spark only system. 

 

A 3200 system can also be used for ignitors and pilots on incinerators and combustors.  

ACL 4000 Flare Stack Ignitor

The ACL 4000 Flare Stack Ignitor is a safe and cost-effective means of lighting all types of flare stacks. 

It does not require any source of power. The ignitor consists of a piezo ignitor, spark rod, a fuel/air mizer and flame arrestor. 

To light the gases as the stack tip, simply open the fuel gas valve and allow the shot tube to fill with the air/fuel mixture, then press the ignition button. 

The flame ignites at the bottom and travels up the stack through a 2" line to the flare tip. 

This system is ideal for flare systems with a continuous pilot or manually operate flare stacks. 

Flare Stack / Incinerator Ignition Systems